Robotics Sportster Flash x2 Instrucciones de operaciones descargar pdf (Pagina 17)

If both modems exchange carrierIf both modems exchange carrier

signals but fail to establish asignals but fail to establish a

communications link,communications link,

• Place the call again. The telephone

company routes all calls, even local calls,

differently each time you call.

• Call a different modem to see if the

problem persists.

• The remote modem might be an older 2400

bps modem that doesn't support error

control. Disable error control by entering the

following command in terminal mode:

AT&M0<Enter> and place the call again.

If your modem doesn't connect atIf your modem doesn't connect at

2400 bps with a 2400 bps modem,2400 bps with a 2400 bps modem,

The remote modem might be an older 2400 bps

modem that does not support error control.

Disable error control with the following

command: AT&M0<Enter> and try connecting

again. When the call is finished, reset the

modem: ATZ<Enter>.

During data transfer…During data transfer…

If your screen displays random orIf your screen displays random or

garbage characters,garbage characters,

• Set your software to the same word

length, parity, and stop bits as the remote

modem.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 67 68

Sin comentarios

Robotics Sportster Flash x2 Instrucciones de operaciones Pagina 17