Robotics Sportster Flash x2 Instrucciones de operaciones descargar pdf (Pagina 18)

• Make sure that your software and

modem are set to the same flow control

setting and to a fixed serial port rate (it

should not be 14,400 or 28,800).

• Type the following command to load the

template that enables hardware flow

control and other optimal settings:

AT&F1&D0<Enter>

If your communicationsIf your communications

software is reportingsoftware is reporting

many Cyclic Redundancymany Cyclic Redundancy

Check (CRC) errors andCheck (CRC) errors and

low Characters Perlow Characters Per

Second (CPS),Second (CPS),

• You might have a bad phone line. Place

the call again. The phone company

routes calls differently each time you call.

• Type the following command to load the

template that enables hardware flow

control and optimal settings:

AT&F1&D0<Enter>

• Lower the serial port rate in your

communications software to 38,400 bps

or 19,200 bps.

• Try a different file transfer protocol.

Zmodem is best. Ymodem is second best.

If errors are occurring in yourIf errors are occurring in your

V.17 (14.4) fax transmissions,V.17 (14.4) fax transmissions,

• Enter the following initialization string in

your software modem setup screen:

AT&D0&H3&I2&R2S7=90

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 67 68

Sin comentarios

Robotics Sportster Flash x2 Instrucciones de operaciones Pagina 18