Robotics Sportster Flash x2 Guía de usuario descargar pdf (Pagina 22)

18 Sportster Flash x2 - User’s Guide

• MP I-modem or NETServer I-modem with x2

Making x2 Work

To use x2, the x2 client modem must connect to an x2 server modem.

If clients attempt to connect to ISPs that do not use x2, the client

modem will negotiate the next available modulation. For example, an

x2 client modem calling into an ISP that only supports V.34, will

negotiate the highest V.34 connection rate. The maximum V.34

connection speed is 33.6kbps.

When an x2 client modem connects to an x2 server modem, the path

through the telephone network between the modems is subject to the

following conditions for an x2 connection to be made.

A Digital Connection At One End

ISPs or online services must have a digital connection to the PSTN.

Most major online services have digital connections to the PSTN.

Only One Digital-to-Analogue Conversion

There can be only one digital-to-analogue conversion in the telephone

network between the x2 server modem and the x2 client modem.

Controlling x2

Use the following S58 settings to control x2:

To do this Use this command

Disable x2

S32.5=1

Enable x2 (default)

S32.5=0

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 70 71

Sin comentarios

Robotics Sportster Flash x2 Guía de usuario Pagina 22