Robotics Sportster Flash x2 Guía de usuario descargar pdf (Pagina 49)

Sportster Flash x2 - User’s Guide 45

Command Summary

· Type commands in either upper or lower case, not a

combination. Use the Backspace key to delete errors. (You

cannot delete the original AT command since it is not stored in

the modem buffer.)

· If a command has numeric options and you don’t include a

number, zero is assumed. For example, if you type ATB, the

command ATB0 is assumed.

· Every command but A/, +++ and A> must begin with the AT

prefix and be entered by pressing a carriage return (Enter key).

· The maximum command length is 60 characters. The modem

doesn’t count the AT prefix, carriage returns, or spaces.

Note: Defaults are marked with an asterisk (*).

Command Set

$ Displays a basic command list; on-line help.

A Manual Answer: goes off hook in answer mode.

Pressing any key aborts the operations.

A/ Re-executes the last issued command. Used

mainly to redial. This does not require the AT

prefix or a Carriage Return.

Any key Aborts off-hook dial/answer operation and

hangs up.

AT Required command prefix, except with A/ and +++.

Use alone to test for OK result code.

Bn U.S./ITU-T answer sequence.

* B0 ITU-T V.25 answer sequence

B1 U.S. answer tone

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 70 71

Sin comentarios

Robotics Sportster Flash x2 Guía de usuario Pagina 49