Robotics Sportster Flash x2 Guía de usuario descargar pdf (Pagina 54)

50 Sportster Flash x2 - User’s Guide

Yn Selects power-on/reset default configuration.

* Y0 Default is profile 0 setting in NVRAM

Y1 Default is profile 1 setting in NVRAM

Y2 Generic Template (&F0)

Y3 Hardware Flow Control (&F1)

Y4 Software Flow Control (&F2)

Zn Resets modem.

Z0 Resets modem to NVRAM profile selected

by Y command

Z1 Resets modem to NVRAM profile 0

Z2 Resets modem to NVRAM profile 1

Z3 Resets modem to factory default profile 0 (&F0)

Z4 Resets modem to factory default profile 1 (&F1)

Z5 Resets modem to factory default profile 2 (&F2)

&$ Displays a list of ampersand (&) commands.

&An Enables/disables ARQ codes.

&A0 ARQ result codes disabled

&A1 ARQ result codes enabled

&A2 V- modulation indicator added

* &A3 Protocol indicators added - LAPM/MNP/NONE

(error control) and V42bis/MNP5 (data

compression)

&Bn Sets modem’s serial port rate.

&B0 Variable, follows connection rate

* &B1 Fixed serial port rate

&B2 Fixed in ARQ mode, variable in non-ARQ mode

&Cn Controls Carrier Detect (CD) signal.

&C0 CD override

* &C1 Normal CD operations

&Dn Controls Data Terminal Ready (DTR) operations.

&D0 DTR override

&D1 Reserved

* &D2 Normal DTR operations

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 70 71

Sin comentarios

Robotics Sportster Flash x2 Guía de usuario Pagina 54