Robotics Sportster Flash x2 Guía de usuario descargar pdf (Pagina 67)

Sportster Flash x2 - User’s Guide 63

S34 0 Bit mapped register setup. To set registers,

see instructions for S13.

Bit Value Result

0 1 Disable 8S-2D trellis

encoding.

1 2 Disable 16S-4D trellis

encoding.

2 4 Disable 32S-2D trellis

encoding.

3 8 Disable 64S-4D trellis

encoding.

4 16 Disable non-linear coding.

5 32 Disable TX level deviation.

6 64 Disable Pre-emphasis.

7 128 Disable Pre-coding.

S35-S37 Reserved.

S38 0 Sets an optional delay, in seconds, before a

forced hang-up and clearing of the Transmit

buffer when DTR drops during an ARQ call.

This allows time for a remote modem to

acknowledge receipt of all transmitted data

before it is disconnected. The modem

immediately hangs up when DTR drops.

This option only applies to connections

terminated by dropping DTR. If the modem

receives the ATH command, it ignores S38

and immediately hangs up.

1 2 ... 62 63 64 65 66 67 68 69 70 71

Sin comentarios

Robotics Sportster Flash x2 Guía de usuario Pagina 67