Robotics Sportster Flash x2 Guía de usuario descargar pdf (Pagina 58)

Sportster MessagePlus54

S8 2 Sets the duration, in seconds, for the pause (,)

option in the Dial command.

S9 6 Sets the required duration, in tenths of a second,

of the remote modem’s carrier signal before

recognition by the Sportster.

S10 7 Sets the duration, in tenths of a second, that the

modem waits to hang up after loss of carrier.

This guard time allows the modem to distinguish

between a line disturbance from a true

disconnect (hang up) by the remote modem.

While we don’t recommend connecting the

modem to a line with call waiting, if you have it,

you may wish to adjust this setting upward to

prevent the modem from misinterpreting the

second call signal as a disconnect by the remote

modem.

7 A better alternative is to ask your phone

company how to temporarily disable call waiting

(usually *70W). For example: ATDT *70W

phone number.

NOTE: If you set S10 = 255, the modem will not

hang up when carrier is lost. Dropping DTR

hangs up the modem.

S11 70 Sets the duration and spacing, in milliseconds,

for tone dialing.

S12 50 Sets the duration, in fiftieths of a second, of the

guard time for the escape code sequence (+++).

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 69 70

Sin comentarios

Robotics Sportster Flash x2 Guía de usuario Pagina 58