Robotics Sportster Flash x2 Guía de usuario descargar pdf (Pagina 64)

Sportster MessagePlus60

S38 0 Sets an optional delay, in seconds, before a forced

hang-up and clearing of the Transmit buffer when

DTR drops during an ARQ call. This allows time

for a remote modem to acknowledge receipt of all

transmitted data before it is disconnected. The

modem immediately hangs up when DTR drops.

This option only applies to connections terminated

by dropping DTR. If the modem receives the ATH

command, it ignores S38 and immediately hangs

up.

S39-S40 0 Reserved

S41 0 Bit mapped register setup. To set registers, see

instructions for S13.

S42 0 Reserved

S43 112 SR 8-bit S-Register. Bit mapped register stored

in the NVRAM.

Bit Value Result

0 1 Sportster MessagePlus

disabled.

1 2 Dialup Retrieval disabled.

2 4 N/A

3 8 Monitor disable.

4 16 Fax Reception and

Storage enabled.

5 32 Voice Reception and

Storage enabled.

6 64 (High) Answer in SR

Mode after four RINGs.

7 128 (Low) Answer in SR Mode

after four RINGs.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 70

Sin comentarios

Robotics Sportster Flash x2 Guía de usuario Pagina 64